JBL DSP Amplifier DSP2544
The JBL DSP Amplifier is an audio processor for fine-tuning of aftermarket audio systems. It is a self-contained audio
system with 4-channel powered audio outputs and 2-channel preamp outputs, an easy-to-use tuning interface a
novice can understand, and detailed tuning capabilities to satisfy even experienced installers. With a USB connection
to access the tuning interface using a Windows PC, you can control fully variable crossovers, selectable 0-to-48 dB
slopes, time delay, 31-band parametric or graphic EQ adjustment, assignable input-to-output mixer with input
channel summing, channel gain, master volume control, clipping indicator to ensure the audio output is not distorted,
and ability to save up to 10 presets
MRP:
₹22,990.00
₹16,000.00
(inc GST)
30% Off
Inclusive of all taxes
Out of stock
Product Details
SPECIFICATIONS
- RMS Power Output (Watts x Channel) @ 4-ohm: 25W x 4
- RMS Power Output (Watts x Channel) @ 2-ohm: 35W x 4
- Amplifier Class: Class A/B
- Battery Voltage Range (Volts): 8V to 16V
- Selectable Turn-on Modes: 12V, Audio Signal Sense, DC Offset, 12V remote output
- LED Indicator: red/green
- Frequency Response: 10Hz to 22kHz @ -3dB
- Signal-to-Noise Ratio: >80dB
- Signal-to-Noise Ratio (CEA-2006): 68dB
- THD+N @ 4-ohm: <10%
- Input Sensitivity, selectable: High-level or low-level
- Input Sensitivity – Low Level: 680mV to 6V
- Input Sensitivity – High Level: 1.6V to 15V
- Channel 5 & 6 pre-out voltage: 4V
- Variable Crossovers: All Channels: HPF, LPF, Band-pass w/ selectable 0 to 48dB slope Gain, variable: All Channels with PC
- Subwoofer level, variable: Channels 5 & 6 in PC software or using accessory remote control from -30dB to+6dB
- Fuse Rating: 15A
- Minimum Recommended Power/Ground Wire Gauge: 8awg
- Speaker Level Inputs: Yes
- Remote Bass Control: Yes, JBL RBC sold separately
- Length: 9-3/8″ (237.5mm)
- Width: 5-11/16″ (144mm)
- Height: 1-15/16″ (49.5mm)
- Weight: Approx. 1000g
- Protection: DC, OVP, UVP, OCP, OTP
DSP Output Channels | 6 Channel Output |
-
-
I-Copper I-08E3 8 Gauge Amplifier Wiring KitMRP: ₹1,499.00 ₹990.00 (inc GST) 34% Off Inclusive of all taxesOut Of Stock
Related products
Check items to add to the cart or
-
Pioneer GM-A3702MRP: ₹5,990.00 ₹5,550.00 (inc GST) 7% Off Inclusive of all taxes
-
Pioneer GM-A6704MRP: ₹8,490.00 ₹6,100.00 (inc GST) 28% Off Inclusive of all taxes
-
I-Copper I-08E3 8 Gauge Amplifier Wiring KitMRP: ₹1,499.00 ₹990.00 (inc GST) 34% Off Inclusive of all taxes
-
Pioneer GM-D8701MRP: ₹20,900.00 ₹16,500.00 (inc GST) 21% Off Inclusive of all taxes
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
There are no questions asked for this product.
The information below is required for social login
Hey There!