Ideal for Doors, Roofs, Firewalls, Wheel Arches, Boot Compartments and Trimmings.
Designed to be installed on clean Metal Surfaces.

*Please note the colour of the damping sheets have been changed to black.

Specifications:

• Made from Aluminium Foil with Embossing and Printed Logo
  
• Adhesive Polymer Layer protected with Anti-adhesive Paper
• Tested to withstand 160°C of heat.
• Sheet Size: 750mm X 500mm
• Total Coverage: 3.75m2
• Sheet Thickness: 2.2mm
• Number of Sheets: 10 Sheets
• Mechanical Loss factor at 10C: 0.33

Installation Instructions

• Prepping the Surface
  Start by getting all metal surfaces clean from dust, debris, oil, wax and moisture. For this we recommend a microfiber
  cloth, a breathing mask, and a quick drying solvent such as Acetone. If you have some rust, it is possible it requires a bit
  more attention and detail to ensure the material will stick well. Once all the surfaces have been prepped and properly
  air dried, we can start applying material. Our material is unique, so a household pair of scissors, exacto knife, or razor
  blade can be used to cut whatever shapes you need.

• Installation
  Step 01
  Roll the material out on a flat surface and you can measure the size you will need (paper or cardboard can be used to
  cut templates). After you have made your cut, peel off the white paper on the back covering the adhesive.
  
  Step 02
  When you're ready to apply, pick a place to start (it is best to start from the top down) so yo,u can work the material all
  one direction and minimize any trapped air pockets. You can push the material with your hand a with medium pressure
  outwards until the material has complete contact. If you see any possible trapped air, you can use the point of a razor
  blade or a sewing needle to poke a hole and push down on the material.
  
  Step 03
  The main focus is to ensure the adhesive has proper contact to the metal surface. Check that any holes that require
  fastening hardware are not blocked. Repeat this step for the remainder of the installation and ensure lasting adhesion
  with the maximum insulation.